<pre id="5pj59"></pre>
    <font id="5pj59"><listing id="5pj59"></listing></font><pre id="5pj59"></pre>
    <ol id="5pj59"></ol>

        <ol id="5pj59"></ol>

        Your position is...: Home>Business>CTMS Heat-shrinkable marker sleeves

        CTMS Heat-shrinkable marker sleeves

        CTMS Heat-shrinkable marker sleeves

        KOSOO CTMS

        Heat-shrinkable identification marker sleeves

         

        • Application

        KOSOO CTMS heat-shrinkable identification marker sleeves are designed to meet the requirements of high- performance identification of wire and cable, tools, hoses and equipment. Made from reliable flame-retardant polyolefin with outstanding properties, sleeves can also be used as electrical insulation. Marks are permanent after printing.

         

        • Features/Benefits

        ·Sleeves meet the requirements of AMS-DTL-23053/5 (materials and performance).

        ·Flexible, highly flame-retardant.

        ·Sleeves meet the print performance requirements of SAE-AS81531.

        ·Markers can also provide insulation and strain relief.

        ·Marks are permanent after printing; mark performance improves after shrinking.

        ·Free of PCBs, PCPs, polybrominated biphenyls (PBBs), polybrominated biphenyl oxides and ethers (PBBOs, PBBEs and PBDEs) and toxic heavy metal compounds, which are classified as environmentally hazardous substances. Conform to European RoHS environmental directive.

        ·Operating temperature range: -55℃~125℃

        ·Minimum shrink temperature: 70℃

        ·Minimum full recovery temperature: 110℃     

         

        • Specifications/Standards

        UL224 E214175 125℃ VW-1          

        AMS-DTL-23053/5

        SAE-AS81531, MIL-STD-202

         
        • Specification values

        Physical properties:

          Tensile strength                                10.4 MPa min.

          Elongation                                    200% min.

          Low temperature flexibility   (-55℃, 4hrs)         No cracking

          Heat shock                (250℃, 4hrs)         No cracking, dripping or flowing

        Print performance:

          UL224                                       50 rubs, legible

          MIL-M-81531                                 50 rubs, legible

          MIL-STD-202                                 30 strokes, legible

        Electrical properties:

          Dielectric voltage withstand  2.5KV, 60 sec         No breakdown

        Dielectric strength                              19.7KV/mm min.

        Volume resistivity                              1014Ω·cm min.

        Chemical properties:

          Corrosion                                     No corrosion

        Flammability  AMS-DTL-23053/5                Average burn time is less than 1 minute

        Fluid resistance: (23℃, 24 hrs)                     Followed by print performancetests of 

                                                       SAE-AS81531

         

         

        • Product sizes

                                                                              mm/inch

        Size

        (inch)

        Inside diameter

        Recommended use range

        As supplied (min.)

        After recovery (max.)

        3/32

        2.4 (0.093)

        0.8 (0.031)

        0.9-2.0 (0.035-0.079)

        1/8

        3.2 (0.125)

        1.0 (0.042)

        1.1-2.7 (0.044-0.105)

        3/16

        4.8 (0.187)

        1.6 (0.062)

        1.8-4.1 (0.069-0.160)

        1/4

        6.4 (0.250)

        2.1 (0.083)

        2.3-5.5 (0.091-0.215)

        3/8

        9.5 (0.375)

        3.2 (0.125)

        3.5-8.0 (0.137-0.320)

        1/2

        12.7 (0.500)

        4.2 (0.166)

        4.7-10.8 (0.183-0.425)

        3/4

        19.1 (0.750)

        6.35 (0.250)

        7.0-16.3 (0.275-0.640)

        1

        25.4 (1.000)

        8.5 (0.333)

        9.3-21.6 (0.366-0.850)

        1 1/2

        38.1 (1.500)

        19.1 (0.750)

        21.0-33.0 (0.825-1.300)

        2

        50.8 (2.000)

        25.4 (1.000)

        27.0-48.0 (1.063-1.890)

                                

        • Ordering information

        ·Standard color:White(-WH), yellow(-YL)

        ·Nonstandard color:Special colors can be available upon request.

        ·Nonstandard size

        Special sizes are available upon request.

        ·Standard packaging:2 inch pieces or by spool

        ·Ordering description:Specify product type, size and color.

        Official website

        Contact us

        Tel:+86-20-32079090

        Fax:+86-20-32079018

        Web:www.newsraiser.com

        E_mail:angel@gzkaiheng.com

        Add:NO.148,Chang'an,Guangshan Road,Huangpu District,Guangzhou,China

         

        COPYRIGHT (C) 2007-2008 Guangzhou Kai Heng Enterprise Group Co., Ltd. 粵ICP備17117994 Powered by vancheer
        97热精品免费视频_日本黄三级视频_免费观看的AV网站_免费动漫成本人视频大全